GS-IH Laboratory Dispersion Homogenizer is driven by a compact series excitation micro high-speed motor. It is suitable for mixing low to medium and high viscosity liquids in laboratory, dispersing homogeneous particles in liquid medium, breaking up tissue and cells, etc. The machine is composed of high density die casting aluminium alloy driving motor, high quality stainless steel refined dispersed homogeneous working head and speed control controller. The speed controller adopts IC speed detection and full constant power speed regulation technology, which can effectively compensate for the speed change caused by load change and power supply voltage fluctuation in real time. Display intuitive digital operation speed, operation speed can be set arbitrarily according to the needs of the experiment, with soft start, automatic overload protection, full-range constant power compensation, constant speed mixed experiment effect is ideal, data acquisition is convenient and so on.
technical parameter
Rated voltage AC220 V
Rated frequency 50/60 Hz
Input power 280 W
Output power 200 W
Rated Torque 8.3 N.cm
Working S2-5 min (intermittent)
Combination control knob for operation control mode
Speed Regulation Range (No Load) 2000-21000 rpm
Stepless Speed Control
Speed Digital Display *10 rpm LED
Timing control range 1-1000 min
The function of dynamic speed detection is as follows:
The speed memory function is
The overload protection function is
Maximum Torque of Working Head 8.2 N.cm
Stainless steel 304(optional 316)
Standard Work Head 12G 18G
Permissible ambient temperature not exceeding 40 C
Permissible relative humidity is not more than 80%.
The outline size of the whole machine is 215 x 310 x 720 mm
The weight of the machine is 8.3 kg (gross weight: 10.0 kg)
Dispersed Homogeneous Head Parameters
Work head specification 12G 18G
Throughput (H2O)
30-800 ml 50-1500 ml
Suitable for maximum viscosity 1000 CP 2000 CP
Rotor Maximum Linear Velocity 11 m/s 15 m/s
Minimum/maximum immersion liquid height 25/85 mm 30/120 mm
Stator diameter 12 mm 18 mm
Working head length 150 mm 190 mm
Maximum service temperature 120 C 120 C
Working Head Material SS304# SS304#
Material PTFE PTFE for Work Head Bearing